Click photo to enlarge

 

Facts: muzzle brakes are NOT for everybody as they do increase noise for the shooter, but they are very effective at reducing recoil. I believe there is no brake quiet enough to shoot without hearing protection, so I designed my brake for maximum efficiency.

 

Our "V" port 10-degree brakes are designed to vent out the sides at a slightly up angle, stopping dirt and debris from being blown up when shooting prone (or from a bench). This design also prevents noise from deflecting off the ground back toward the shooter.

Our brakes are made from 416 Stainless Steel, a highly machinable and heat-treatable steel. Most all stainless match barrels are made from 416R.

 

We offer ALL our brakes in a large variety of calibers and diameter/thread pitch.

We offer brake installation...... price is $100 on most rifles

--------------------------------------------------------------------------------------------------------------------

  "V" Port Vaporizer© .875

 

 10 degree angle "V" port.

 7/8" diameter four 3/16" "V" ports This brake works great with sporter weights up to Sendoro contours. Up to 338-cal..

 Price:$95

------------------------------------------------------------

Click photo to enlarge

  

Quantity:  7/8in. V-port brake 1/2x28TPI         ​   Specify caliber in Cart note.
Quantity:  7/8in. V-port brake 9/16x24TPI        ​  Specify caliber in Cart note.
Quantity:  7/8in. V-port brake 5/8X24TPI. ​       ​  Specify caliber in Cart note.

Quantity:  7/8in. V-port brake 1/2x28TPI. Tapered to .665       ​  Specify caliber in Cart note.
Quantity: ​ 7/8in. V-port brake 9/16x24TPI. Tapered to .665        ​  Specify caliber in Cart note.

-------------------------------------------------------------------

"V" Port Vaporizer© 1"

 

 10 degree angle "V" port.

1" diameter four 1/4" "V" ports This brake works great with number 5 contour barrels and larger. Up to 338-cal..

 Price:$110

--------------------------------

click photo to enlarge

Quantity:  1in. V-port brake 5/8x24TPI.       ​  Specify caliber in Cart note.

 

click photo to enlarge

Quantity:  1in. V-port brake 5/8x24TPI. Tapered to .830​         ​  Specify caliber in Cart note.

 

 

----------------------------------------------------------------

 

 

 

 "Mini-X-treme"© brake

 Designed for 7mm & 338-cal's with magnum sporter up to Sendoro contours.

Price:  $155

----------------------------------

Click photo to enlarge

 

Quantity:  Mini-X-Treme brake 5/8x24TPI. Tapered to .830         ​   Specify caliber in Cart note.

 

------------------------------------

NEW!! 

Introducing the "MICRO-X-treme" brake to our amazing line of brakes!!

.875 diameter with four 3/16" "V" ports cut flat top to bottom .75

This brake can also be turned down over the ports to .75 making it a round brake.

 

 

Quantity:        
9/16x24 TPI tapered to .67
Quantity:      
 9/16x24 TPI non tapered
Quantity:      
1/2 x 28 TPI tapered to .67
Quantity:      
 1/2 x 28 TPI non tapered

 

 
 

 

 

 

 

The View Cart

 

 

-------------------------------------

X-treme "V"© Brake

1.375 diameter with five 1/4" "V" ports cut flat on top and bottom to 1.062.

 Designed for 338 Lapua to 408-CheyTac. Sendero contours up to 1-1/4 muzzle diameters.

 Price: $175

 -------------------------------------

Click photo to enlarge  

     

Quantity:  X-Treme V brake 3/4x24TPI. Tapered to 1in.       ​  Specify caliber in Cart note.
Quantity:  X-Treme V-brake 5/8x24TPI. Tapered to .830        ​  Specify caliber in Cart note.